400MHz High Voltage Underground TDR Cable Fault Locator

The XHGG501A2 cable fault tester can accurately and quickly detect the main insulation fault of power cables with voltage levels of 35KV and below; calibrate the cable length; and detect the direction and depth of cable burial.

Technical Parameters

Operation Interface Introduction

1 Display: 12.1-inch industrial touch screen;

2 Communication: low-voltage pulse method pulse signal output interface, high-voltage flashover method sampler receiving signal input interface;

3 Grounding: safety grounding terminal;

4 Power indicator: indicates the internal battery power, 4 grid display;
5 USB-1: external wireless network card and USB communication device;
6 USB-2: external wireless network card and USB communication device;
7 Power switch: "I" position, use AC 220V power supply to power the system;
"II" position, use internal battery to power the system; when the "power socket" is connected to AC 220V power supply, it also charges the battery;
"O" position, turn off the system power;
8 Power socket: instrument working power, AC 220V connection port;
9 Fuse: AC 220V power supply system fuse installation place;
10 ​​Self-test: lower computer transmits signal;
11 On/off: turn on and off the working power of the industrial computer;
12 Amplitude: When collecting waveforms, adjust the amplitude knob to change the amplitude of the collected waveform;
13 Indicator light: Indicator light reflecting the test method;
14 Displacement: When collecting waveforms, adjust the displacement knob to change the height of the baseline of the collected waveform

Application

Fully Automatic TDR Cable Fault Locator

High Voltage Cable Fault Locator

400MHz Cable Fault Locator

400MHz High Voltage Underground TDR Cable Fault Locator Images